IPCC Specification for Base Materials for Rigid and Multilayer Printed Boards August Supersedes IPCB with Amendments. Slash Sheets. Isola laminate and prepreg materials are certified to IPC or IPC IPC, “Specification for Base Materials for Rigid and Multi-layer. IPC Specification for Base Materials for Rigid and Multilayer Printed Boards.
|Published (Last):||25 September 2005|
|PDF File Size:||9.26 Mb|
|ePub File Size:||8.74 Mb|
|Price:||Free* [*Free Regsitration Required]|
There is not more than one piece of residual surface metal after metal removal per 0. Resubmitted lots shall be inspected using tightened inspection. Length, width, thickness and other dimensional characteristics ip be measured with equipment capable of sufficient accuracy to verify the requirements of this speci?
It is recognized that different test methods yield 16 When specimens are tested in accordance with Tablethe average maximum permittivity shall be as indicated in the applicable speci? No failure shall be allowed for any specimen tested. Where there is no speci? With or without inorganic? Glass Transition Temperature The longest dimension of each foil indentation in a specimen shall be measured with a suitable reticule on a minimum 4X magni?
Thickness Tolerance of Laminate Materials. Labels that remain securely affixed and legible during normal handling. Encapsulated metallic particles of any size are not ipd.
IPC – Base Materials, Laminates
To each of them, the members of the IPC extend their gratitude. There are a total of 62 Keyword search terms.
Typical examples of reinforcement designators are shown below: Adjacent edges shall be perpendicular, within 0. An allowance for the roughness of the treated side must be added to all values. 410c1 test specimens shall be constructed such that their thickness shall be 1.
Cellulose paper, Core Secondary 2: Tell you how to make something? At elevated temperature 4. For any alloy or other metals outside this density range, the appropriate factor must be used to calculate the foil thickness.
Prepreg should be allowed to equilibrate at processing conditions before use.
IPC-4101C: Specification for Base Materials for Rigid and Multilayer Printed Boards
For alternate metal claddings not covered by industry standards, requirements shall be as agreed upon between user and supplier. For double-sided bond treated foils, the nominal area weight shall be increased by 4. Pic paper, core Secondary 2: These categories are intended to allow the document user to more easily?
Electrical properties shall be tested on specimens cut from fully cured two-ply samples of a minimum size of mm x mm [5. Dielectric Breakdown, minimum 6.
The purposes of these analyses are to take appropriate actions to achieve and improve process capability. Prepreg must be laminated to produce a minimum thickness of 0. The Test Method 2. Examples to clarify the use of Keywords are shown below: Alpha 1 is the Z-axis CTE as measured at a temperature below the quoted Tg of the material in question and Alpha 2 is the Z-axis CTE as measured at a temperature above 411c quoted Tg of the material in question.
Surface Resistivity, minimum A. Laminate and prepreg base materials shall be packed in a manner that will afford adequate protection against corrosion, deterioration and physical damage during shipment and storage.
IPCC: Specification for Base Materials for Rigid and Multilayer Printed Boards
Title, number and date of any applicable drawing. Steven Ethridge, Dell Inc. For alternate reinforcement types not covered by industry standards, requirements shall be as agreed upon between user and supplier.
Specimens 75 mm x 75 mm [2. To assist those searches performed with the hard copy of this speci? A product with 15 characteristics may meet speci?
Title, number and revision letter of the speci? Makoto Kato, Hitachi Chemical Co. E Reinforcement Style see 1.
Why is there a charge for this document?